CounterFlow heat recovery ventilation air exchanger 370m3, recuperator eff. 96%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT Super efficient REK+ aluminium heat exchanger. REK+ counterflow plate heat exchanger is for transfer of heat between incoming and outgoing air in a ventilation system. The heat exchanger does not mix dirty and fresh air, or transfer humidity. It only transfers heat. Efficiency up to 96% guaranteed by patented technology. Optimized pressure loss computer simulations used. Double folding technology for all the range = the best tightness and durability on the market. Calculation software and DLL library. Possibility to have inbuilt bypass. Possibility of Combi Solution. Certifikation: Eurovent, ILH, TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 80 m3/h – Efficiency 96,8% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 27,7 Pa, exhaust – 40,3 Pa. Air flow volume 220 m3/h – Efficiency 95,5% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 104,6a, exhaust – 130,3 Pa. Air flow volume 370 m3/h – Efficiency 94,9% – Face air flow speed upon entering the recuperator 2,5 m/s – Pressure drop – supply – 228,5 Pa, exhaust – 345,6 Pa. Diagram of Pressure drop PD [Pa] and Airflow volume AV [m3/h] – exchanger REK+39-150-24. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. Diagram of Efficiency EFF [%] and Airflow volume AV [m3/h] – exchanger REK+39-150-24. DIMENSIONS OF REK+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -40°C to +80°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet and inlet, or with a maximum imbalance of +/- 50%. The maximum pressure difference between the inlet and the outlet is 800 Pa. The use of double-hem technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 96% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Der Gegenstrom-Plattenwärmetauscher REK+ dient zur Übertragung von Wärme zwischen der Eingangsund Ausgangsluft im Ventilationssystem. Der Wärmetauscher mischt nicht verunreinigte und frische Luft, er überträgt auch keine Feuchtigkeit. Er überträgt nur Wärme. El intercambiador de calor por contracorriente con placas REK+ sirve para la transferencia de calor entre el aire de entrada y el de salida en un sistema de ventilación. El intercambiador de calor no mezcla el aire sucio y el aire fresco, ni transfiere hume. The item “CounterFlow heat recovery ventilation air exchanger 370m3, recuperator eff. 96%” is in sale since Tuesday, February 2, 2021. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “rekupex” and is located in Cervený Kostelec. This item can be shipped to United States, all countries in Europe.
- Model: REK+39-150-24
- Packages:: Polystyren – Paper box
- Type: CounterFlow Plate
- Brand: RECUTECH
- Country/Region of Manufacture: Czech Republic
- Optimal air flow volume:: 0 – 370 m3/h
- Lamellas material:: aluminium – patented geometry
- Warranty:: 36 months
- Plate distance:: 2,4 mm
- Air temperature:: -40 to + 80°C
- Dimension (L*W*H):: 619*394*150 mm
- Case Material:: Aluminium
CounterFlow heat recovery ventilation air exchanger 570m3, recuperator eff. 96%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT Super efficient REK+ aluminium heat exchanger. REK+ counterflow plate heat exchanger is for transfer of heat between incoming and outgoing air in a ventilation system. The heat exchanger does not mix dirty and fresh air, or transfer humidity. It only transfers heat. Efficiency up to 96% guaranteed by patented technology. Optimized pressure loss computer simulations used. Double folding technology for all the range = the best tightness and durability on the market. Calculation software and DLL library. Possibility to have inbuilt bypass. Possibility of Combi Solution. Certifikation: Eurovent, ILH, TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 105 m3/h – Efficiency 96,2% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 20,1 Pa, exhaust – 29,3 Pa. Air flow volume 350 m3/h – Efficiency 95,5% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 104,6 Pa, exhaust – 153,7 Pa. Air flow volume 570 m3/h – Efficiency 95,2% – Face air flow speed upon entering the recuperator 2,5 m/s – Pressure drop – supply – 215,6 Pa, exhaust – 320,2 Pa. Diagram of Pressure drop PD [Pa] and Airflow volume AV [m3/h] – exchanger REK+31-300-22. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. Diagram of Efficiency EFF [%] and Airflow volume AV [m3/h] – exchanger REK+31-300-22. DIMENSIONS OF REK+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -40°C to +80°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet and inlet, or with a maximum imbalance of +/- 50%. The maximum pressure difference between the inlet and the outlet is 800 Pa. The use of double-hem technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 96% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Der Gegenstrom-Plattenwärmetauscher REK+ dient zur Übertragung von Wärme zwischen der Eingangsund Ausgangsluft im Ventilationssystem. Der Wärmetauscher mischt nicht verunreinigte und frische Luft, er überträgt auch keine Feuchtigkeit. Er überträgt nur Wärme. El intercambiador de calor por contracorriente con placas REK+ sirve para la transferencia de calor entre el aire de entrada y el de salida en un sistema de ventilación. El intercambiador de calor no mezcla el aire sucio y el aire fresco, ni transfiere hume. The item “CounterFlow heat recovery ventilation air exchanger 570m3, recuperator eff. 96%” is in sale since Monday, June 29, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “rekupex” and is located in Cervený Kostelec. This item can be shipped to United States, all countries in Europe.
- Type: Counterflow Heat Exchanger
- Brand: recutech
- Manufacturer Warranty: 3 Years
- Country/Region of Manufacture: Czech Republic
- Material: Aluminum
- Air Temperature: -40 to +80°C
- Optimal Air Flow Volume:: 50 – 570 m3/h
- Lamellas material:: aluminium – patented geometry
- Plate distance:: 2,2 mm
CounterFlow heat recovery ventilation air exchanger 480 m3, recuperator eff. 96%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT REP+ plastic air to air exchangers. REP+ exchangers range brings the plastic alternative to the REK+ counter flow heat exchangers. The range offers good ratio between price level and quality. Combination of pressure drop and efficiency ensures the right parameters for SEC calculation of your residential unit. Efficiency up to 96 %. Lamellas welded with ultrasound. Manufactured from HPS without silicone. Protects the environment as well as improves SFP. The best exchangers for HRV in the market. Brilliant balance between pressure loss and efficiency. Most efficient product of its type. Good ratio between price level and quality. Parameters to ensure high SEC class level. TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? RECUBOX REKUPEX – protiproudý tepelný výmník vzduch-vzduch v oplátní. Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 90 m3/h – Efficiency 96% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 25,3 Pa, exhaust – 40,2 Pa. Air flow volume 280 m3/h – Efficiency 95,1% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 100 Pa, exhaust – 165,4 Pa. Air flow volume 480 m3/h – Efficiency 94,7% – Face air flow speed upon entering the recuperator 2,5 m/s – Pressure drop – supply – 221,7 Pa, exhaust – 372,4 Pa. Diagram of Pressure drop PD [Pa] – Airflow volume AV [m3/h] – exchanger REP+27-300-H-X-32. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. Diagram of Efficiency EFF [%] – Airflow volume AV [m3/h] – exchanger REP+23-200-H-X-30. DIMENSIONS OF REP+ EXCHANGERS. KEY TO CODING OF REP+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -20°C to +60°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet. And inlet, or with a maximum imbalance of +/- 50%. Difference between the inlet and the outlet is 800 Pa. The use of ultrasonic welding technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 92% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Die REP+ Reihe bringt die Alternative aus Kunststoff zu dem REK+ Gegenstrom-Wärmetauscher. Diese Reihe bietet ein gutes Verhältnis zwischen Preisniveau und Qualität. Die Kombination von Druckabfall und Effizienz sorgt für die richtigen Parameter für die Berechnung des spezifischen Energieverbrauchs Ihrer Wohneinheit. La serie REP+ es una alternativa a los intercambiadores por contracorriente REK+. Esta serie ofrece una buena relación entre precio y calidad. La combinación de la pérdida de carga y la eficiencia garantizan unos parámetros correctos para el cálculo SEC de su equipo doméstico. The item “CounterFlow heat recovery ventilation air exchanger 480 m3, recuperator eff. 96%” is in sale since Tuesday, February 25, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “rekupex” and is located in ervený Kostelec. This item can be shipped to United States, all countries in Europe.
- Model: REP+27-300-H-X-32
- Air temperature: – 20 to + 60°C
- Certification: EUROVENT
- Dimension (L*W*H): 455*230*200 mm
- Type: counterflow – plate
- Brand: RECUTECH
- Country/Region of Manufacture: Czech Republic
- Case Material: Aluminium
- Packages: Polystyren – Paper box
- Optimal air flow volume: 0 – 480 m3/h
- Max. airflow volume: 630 m3/h
- Lamella material:: Hygienic Plastic
- Warranty: 36 months
- Plate distance: 3,2 mm
CounterFlow heat recovery ventilation air exchanger 1500m3, recuperator eff. 96%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT Super efficient REK+ aluminium heat exchanger. REK+ counterflow plate heat exchanger is for transfer of heat between incoming and outgoing air in a ventilation system. The heat exchanger does not mix dirty and fresh air, or transfer humidity. It only transfers heat. Efficiency up to 96% guaranteed by patented technology. Optimized pressure loss computer simulations used. Double folding technology for all the range = the best tightness and durability on the market. Calculation software and DLL library. Possibility to have inbuilt bypass. Possibility of Combi Solution. Certifikation: Eurovent, ILH, TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 300 m3/h – Efficiency 96,2% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 22,1 Pa, exhaust – 32,2 Pa. Air flow volume 900 m3/h – Efficiency 95,6% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 99,3 Pa, exhaust – 145,9 Pa. Air flow volume 1500 m3/h – Efficiency 95,3% – Face air flow speed upon entering the recuperator 2,5 m/s – Pressure drop – supply – 211,3 Pa, exhaust – 313,7 Pa. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. DIMENSIONS OF REK+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -40°C to +80°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet and inlet, or with a maximum imbalance of +/- 50%. The maximum pressure difference between the inlet and the outlet is 800 Pa. The use of double-hem technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 96% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Der Gegenstrom-Plattenwärmetauscher REK+ dient zur Übertragung von Wärme zwischen der Eingangsund Ausgangsluft im Ventilationssystem. Der Wärmetauscher mischt nicht verunreinigte und frische Luft, er überträgt auch keine Feuchtigkeit. Er überträgt nur Wärme. El intercambiador de calor por contracorriente con placas REK+ sirve para la transferencia de calor entre el aire de entrada y el de salida en un sistema de ventilación. El intercambiador de calor no mezcla el aire sucio y el aire fresco, ni transfiere hume. The item “CounterFlow heat recovery ventilation air exchanger 1500m3, recuperator eff. 96%” is in sale since Monday, June 29, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “rekupex” and is located in Cervený Kostelec. This item can be shipped to United States, all countries in Europe.
- Model: REK+31-800-22
- Brand: RECUTECH
- Country/Region of Manufacture: Czech Republic
- Air temperature:: -40 to + 80°C
- Dimension (L*W*H):: 537*312*800mm
- Case Material:: Aluminium
- Packages:: Polystyren – Paper box
- Optimal air flow volume:: 0 – 1500 m3/h
- Heat Exchanger Type: CounterFlow Plate
- Lamellas material:: aluminium – patented geometry
- Warranty:: 36 months
- Plate distance:: 2,2 mm
CounterFlow heat recovery ventilation air exchanger 260m3, recuperator eff. 96%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT Super efficient REK+ aluminium heat exchanger. REK+ counterflow plate heat exchanger is for transfer of heat between incoming and outgoing air in a ventilation system. The heat exchanger does not mix dirty and fresh air, or transfer humidity. It only transfers heat. Efficiency up to 96% guaranteed by patented technology. Optimized pressure loss computer simulations used. Double folding technology for all the range = the best tightness and durability on the market. Calculation software and DLL library. Possibility to have inbuilt bypass. Possibility of Combi Solution. Certifikation: Eurovent, ILH, TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 50 m3/h – Efficiency 95,4% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 17,2 Pa, exhaust – 26,8 Pa. Air flow volume 160 m3/h – Efficiency 93,7% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 90 Pa, exhaust – 144,1 Pa. Air flow volume 260 m3/h – Efficiency 95,2% – Face air flow speed upon entering the recuperator 2,5 m/s – Pressure drop – supply – 222 Pa, exhaust – 374,8 Pa. Diagram of Pressure drop PD [Pa] and Airflow volume AV [m3/h] – exchanger REK+23-200-22. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. Diagram of Efficiency EFF [%] and Airflow volume AV [m3/h] – exchanger REK+23-200-22. DIMENSIONS OF REK+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -40°C to +80°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet and inlet, or with a maximum imbalance of +/- 50%. The maximum pressure difference between the inlet and the outlet is 800 Pa. The use of double-hem technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 96% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Der Gegenstrom-Plattenwärmetauscher REK+ dient zur Übertragung von Wärme zwischen der Eingangsund Ausgangsluft im Ventilationssystem. Der Wärmetauscher mischt nicht verunreinigte und frische Luft, er überträgt auch keine Feuchtigkeit. Er überträgt nur Wärme. El intercambiador de calor por contracorriente con placas REK+ sirve para la transferencia de calor entre el aire de entrada y el de salida en un sistema de ventilación. El intercambiador de calor no mezcla el aire sucio y el aire fresco, ni transfiere hume. The item “CounterFlow heat recovery ventilation air exchanger 260m3, recuperator eff. 96%” is in sale since Saturday, December 28, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “rekupex” and is located in Cervený Kostelec. This item can be shipped worldwide.
- Air temperature:: -40 to + 80°C
- Dimension (L*W*H):: 455*230*200 mm
- Case Material:: Aluminium
- Packages:: Polystyren – Paper box
- Optimal air flow volume:: 0 – 260m3/h
- Model: REK+23-200-22
- Country/Region of Manufacture: Czech Republic
- Heat Exchanger Type: CounterFlow Plate
- Lamellas material:: aluminium – patented geometry
- Warranty:: 36 months
- Plate distance:: 2,2 mm
- Brand: RECUTECH
CounterFlow heat recovery ventilation air exchanger 200 m3, efficiency 95%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT RSP+ plastic air to air exchangers. RSP+ range brings a perfect new solution for ErP VU 1253/2014 Ecodesign requirements. The range offers different options to bring your RVU into the first class among the others. Combination of pressure drop and efficiency ensures the right parameters for SEC calculation. Efficiency up to 95 %. Lamellas welded with ultrasound. Manufactured from HPS without silicone. Protects the environment as well as improves SFP. Lowered pressure drop compared to the similar products on the market. The only of its kind Eurovent certified. Most efficient product of its type. Good ratio between price level and quality. Parameters to ensure high SEC class level. Certification: Eurovent, ILH, TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 50 m3/h – Efficiency 95,1% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 26,2 Pa, exhaust – 41,2 Pa. Air flow volume 120 m3/h – Efficiency 93,6% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 139,4 Pa, exhaust – 222,1 Pa. Air flow volume 170 m3/h – Efficiency 93% – Face air flow speed upon entering the recuperator 2,1 m/s – Pressure drop – supply – 240 Pa, exhaust – 385,1 Pa. Diagram of Pressure drop PD [Pa] and Airflow volume AV [m3/h] – exchanger RSP+16-100-H-F-23. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. Diagram of Efficiency EFF [%] and Airflow volume AV [m3/h] – exchanger RSP+16-750-H-X-23. RECUBOX REKUPEX – protiproudý tepelný výmník vzduch-vzduch v oplátní. DIMENSIONS OF RSP+ EXCHANGERS. KEY TO CODING OF RSP+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY AND EFFICIENCY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -20°C to +60°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet. And inlet, or with a maximum imbalance of +/- 50%. Difference between the inlet and the outlet is 800 Pa. The use of ultrasonic welding technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 95% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Die RSP+ Reihe ist die perfekte neue Lösung für ErP VU 1253/2014 Ecodesign Anforderungen. Die Reihe bietet verschiedene Optionen, damit Ihr Wohnungslüftungsgerät in die erste Klasse gehört. Die Kombination von Druckabfall und Effizienz sorgt für die richtigen Parameter für die Berechnung des spezifischen Energieverbrauchs. RSP+ , ErP VU 1253/2014 «». La serie RSP+ aporta una solución perfectamente nueva que cumple los requisitos ErP 2018. Esta serie permite elegir los parámetros óptimos haciendo hincapié en la pérdida de carga o la efectividad. The item “CounterFlow heat recovery ventilation air exchanger 200 m3, efficiency 95%” is in sale since Friday, February 28, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Units\Central Air Conditioning Units”. The seller is “rekupex” and is located in Cervený Kostelec. This item can be shipped worldwide.
- Lamella material:: Hygienic plastic (HPS)
- Warranty: 36 months (you get an invoice)
- Plate distance: 2,3 mm
- Air temperature: -20 to +60°C
- Dimension (L*W*H): 366*366*100 mm
- Model: RSP+16-100-H-F-23
- Country/Region of Manufacture: Czech Republic
- Case Material: Aluminium
- Certification: EUROVENT
- Max. airflow volume: 200
- Heat Exchanger Type: AIR COUNTERFLOW-PLATE
- Packages: unbreakable polystyren-paper box
- MPN: Does Not Apply
- Brand: RECUTECH
- Optimal airflow volume: 10 – 200 m3/h
CounterFlow heat recovery ventilation air exchanger 750m3, recuperator eff. 96%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT Super efficient REK+ aluminium heat exchanger. REK+ counterflow plate heat exchanger is for transfer of heat between incoming and outgoing air in a ventilation system. The heat exchanger does not mix dirty and fresh air, or transfer humidity. It only transfers heat. Efficiency up to 96% guaranteed by patented technology. Optimized pressure loss computer simulations used. Double folding technology for all the range = the best tightness and durability on the market. Calculation software and DLL library. Possibility to have inbuilt bypass. Possibility of Combi Solution. Certifikation: Eurovent, ILH, TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 150 m3/h – Efficiency 96,2% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 22,1 Pa, exhaust – 32,2 Pa. Air flow volume 450 m3/h – Efficiency 95,5% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 99,3 Pa, exhaust – 145,8 Pa. Air flow volume 750 m3/h – Efficiency 96,2% – Face air flow speed upon entering the recuperator 2,5 m/s – Pressure drop – supply – 211,3 Pa, exhaust – 313,7 Pa. Diagram of Pressure drop PD [Pa] and Airflow volume AV [m3/h] – exchanger REK+31-400-22. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. Diagram of Efficiency EFF [%] and Airflow volume AV [m3/h] – exchanger REK+31-400-22. DIMENSIONS OF REK+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -40°C to +80°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet and inlet, or with a maximum imbalance of +/- 50%. The maximum pressure difference between the inlet and the outlet is 800 Pa. The use of double-hem technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 96% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Der Gegenstrom-Plattenwärmetauscher REK+ dient zur Übertragung von Wärme zwischen der Eingangsund Ausgangsluft im Ventilationssystem. Der Wärmetauscher mischt nicht verunreinigte und frische Luft, er überträgt auch keine Feuchtigkeit. Er überträgt nur Wärme. El intercambiador de calor por contracorriente con placas REK+ sirve para la transferencia de calor entre el aire de entrada y el de salida en un sistema de ventilación. El intercambiador de calor no mezcla el aire sucio y el aire fresco, ni transfiere hume. The item “CounterFlow heat recovery ventilation air exchanger 750m3, recuperator eff. 96%” is in sale since Tuesday, January 28, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “rekupex” and is located in Cervený Kostelec. This item can be shipped worldwide.
- Air temperature:: -40 to + 80°C
- Dimension (L*W*H):: 537*312*400 mm
- Case Material:: Aluminium
- Packages:: Polystyren – Paper box
- Optimal air flow volume:: 0 – 750 m3/h
- Model: REK+31-400-22
- Country/Region of Manufacture: Czech Republic
- Heat Exchanger Type: CounterFlow Plate
- Lamellas material:: aluminium – patented geometry
- Warranty:: 36 months
- Plate distance:: 2,2 mm
- Brand: RECUTECH
CounterFlow heat recovery ventilation air exchanger 1400m3, efficiency 95%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT RSP+ plastic air to air exchangers. RSP+ range brings a perfect new solution for ErP VU 1253/2014 Ecodesign requirements. The range offers different options to bring your RVU into the first class among the others. Combination of pressure drop and efficiency ensures the right parameters for SEC calculation. Efficiency up to 95 %. Lamellas welded with ultrasound. Manufactured from HPS without silicone. Protects the environment as well as improves SFP. Lowered pressure drop compared to the similar products on the market. The only of its kind Eurovent certified. Most efficient product of its type. Good ratio between price level and quality. Parameters to ensure high SEC class level. Certification: Eurovent, ILH, TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 280 m3/h – Efficiency 95,5% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 26,2 Pa, exhaust – 41,2 Pa. Air flow volume 950 m3/h – Efficiency 93,5% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 151,5 Pa, exhaust – 241,5 Pa. Air flow volume 1250 m3/h – Efficiency 93% – Face air flow speed upon entering the recuperator 2,0 m/s – Pressure drop – supply -232,6 Pa, exhaust – 372,9 Pa. Diagram of Pressure drop PD [Pa] and Airflow volume AV [m3/h] – exchanger RSP+16-750-H-X-23. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. Diagram of Efficiency EFF [%] and Airflow volume AV [m3/h] – exchanger RSP+16-750-H-X-23. RECUBOX REKUPEX – protiproudý tepelný výmník vzduch-vzduch v oplátní. DIMENSIONS OF RSP+ EXCHANGERS. KEY TO CODING OF RSP+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY AND EFFICIENCY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -20°C to +60°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet. And inlet, or with a maximum imbalance of +/- 50%. Difference between the inlet and the outlet is 800 Pa. The use of ultrasonic welding technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 95% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Die RSP+ Reihe ist die perfekte neue Lösung für ErP VU 1253/2014 Ecodesign Anforderungen. Die Reihe bietet verschiedene Optionen, damit Ihr Wohnungslüftungsgerät in die erste Klasse gehört. Die Kombination von Druckabfall und Effizienz sorgt für die richtigen Parameter für die Berechnung des spezifischen Energieverbrauchs. RSP+ , ErP VU 1253/2014 «». La serie RSP+ aporta una solución perfectamente nueva que cumple los requisitos ErP 2018. Esta serie permite elegir los parámetros óptimos haciendo hincapié en la pérdida de carga o la efectividad. The item “CounterFlow heat recovery ventilation air exchanger 1400m3, efficiency 95%” is in sale since Thursday, September 5, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Units\Central Air Conditioning Units”. The seller is “rekupex” and is located in Cervený Kostelec. This item can be shipped worldwide.
- Certification: EUROVENT
- Max. airflow volume: 1500
- Heat Exchanger Type: AIR COUNTERFLOW-PLATE
- Packages: unbreakable polystyren-paper box
- Optimal airflow volume: 50 – 1400 m3/h
- Model: RSP+16-750-H-X-23
- Country/Region of Manufacture: Czech Republic
- Lamella material:: Hygienic plastic (HPS)
- Warranty: 36 months (you get an invoice)
- Plate distance: 2,3 mm
- Air temperature: -20 to +60°C
- Dimension (L*W*H): 366*366*750 mm
- MPN: Does Not Apply
- Brand: RECUTECH
- Case Material: Aluminium
CounterFlow heat recovery ventilation air exchanger 570m3, recuperator eff. 96%
We are REKUPEX and we offer. The high efficiency recuperative exchangers. For your heat recovery ventilation systems and air recuperative project. We are happy to be official proud dealer of Czech producer RECUTECH. ABOUT Super efficient REK+ aluminium heat exchanger. REK+ counterflow plate heat exchanger is for transfer of heat between incoming and outgoing air in a ventilation system. The heat exchanger does not mix dirty and fresh air, or transfer humidity. It only transfers heat. Efficiency up to 96% guaranteed by patented technology. Optimized pressure loss computer simulations used. Double folding technology for all the range = the best tightness and durability on the market. Calculation software and DLL library. Possibility to have inbuilt bypass. Possibility of Combi Solution. Certifikation: Eurovent, ILH, TÜV, EAC, QMS, OHMS, EMS. Recutech – Production show. Video will open in a new window. Using the mobile app? Results of exchanger testing. Tested according to EN 308. The inward/outward air flow ratio is 1:1, the outward air temperature -5 °C, and relative humidity 25%. Internal air temperature 25 °C, relative humidity 80%. Air flow volume 150 m3/h – Efficiency 96,2% – Face air flow speed upon entering the recuperator 0,5 m/s – Pressure drop – supply – 22,1 Pa, exhaust – 32,2 Pa. Air flow volume 450 m3/h – Efficiency 95,5% – Face air flow speed upon entering the recuperator 1,5 m/s – Pressure drop – supply – 99,3 Pa, exhaust – 145,8 Pa. Air flow volume 750 m3/h – Efficiency 96,2% – Face air flow speed upon entering the recuperator 2,5 m/s – Pressure drop – supply – 211,3 Pa, exhaust – 313,7 Pa. Diagram of Pressure drop PD [Pa] and Airflow volume AV [m3/h] – exchanger REK+31-300-22. Input values for average winter season in the Czech Republic. The inward/outward air flow ratio is 1:1, the outward air temperature 1 °C, and relative humidity 78%. Internal air temperature 25 °C, relative humidity 28%, calculated by EUROVENT certificated software. Diagram of Efficiency EFF [%] and Airflow volume AV [m3/h] – exchanger REK+31-300-22. DIMENSIONS OF REK+ EXCHANGERS. COMPUTER OPTIMIZED LAMELLA GEOMETRY. The efficiency of the heat exchanger is proportional to the outside temperature. The countercurrent air-to-air heat exchanger is made of durable materials. The casing is made of sheet aluminium and sealed with hot glue. The faces are glued using MS polymer. The heat exchangers do not contain silicone and they comply with the REACH 1907/2006 and RoHS 2011/65/EU Directives. It is composed of individual HIPS plastic plates, which are joined together by ultrasonic welding and are coated with sheet aluminium. The outgoing and incoming air flows between the plates and transfers energy to each other. The outgoing and incoming air does not mix in the heat exchanger. Only the heat is transferred. TECHNICAL DATA AND OPERATING CONDITIONS. Operating temperatures -40°C to +80°C. Relative humidity 0% to 100%. Maximum recommended flow through the faces is 3 m/s on the inlet. We recommend using a heat exchanger with a balanced ratio between the outlet and inlet, or with a maximum imbalance of +/- 50%. The maximum pressure difference between the inlet and the outlet is 800 Pa. The use of double-hem technology on all sizes ensures maximum tightness. The Eurovent certification guarantees up to 96% efficiency. This exchanger you can install instead of Recair, Heatex, Holmak, Klingenburg or Eri recovery corporation. Der Gegenstrom-Plattenwärmetauscher REK+ dient zur Übertragung von Wärme zwischen der Eingangsund Ausgangsluft im Ventilationssystem. Der Wärmetauscher mischt nicht verunreinigte und frische Luft, er überträgt auch keine Feuchtigkeit. Er überträgt nur Wärme. El intercambiador de calor por contracorriente con placas REK+ sirve para la transferencia de calor entre el aire de entrada y el de salida en un sistema de ventilación. El intercambiador de calor no mezcla el aire sucio y el aire fresco, ni transfiere hume. The item “CounterFlow heat recovery ventilation air exchanger 570m3, recuperator eff. 96%” is in sale since Tuesday, January 28, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “rekupex” and is located in Cervený Kostelec. This item can be shipped worldwide.
- Air temperature:: -40 to + 80°C
- Dimension (L*W*H):: 537*312*300mm
- Case Material:: Aluminium
- Packages:: Polystyren – Paper box
- Optimal air flow volume:: 0 – 570 m3/h
- Model: REK+31-300-22
- Country/Region of Manufacture: Czech Republic
- Heat Exchanger Type: CounterFlow Plate
- Lamellas material:: aluminium – patented geometry
- Warranty:: 36 months
- Plate distance:: 2,2 mm
- Brand: RECUTECH