Results for tag "water"

267 Articles
CXRacing-Aluminum-Heat-Exchanger-For-Air-to-Water-Intercooler-Supercharger-01-frnh

CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Supercharger

CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Supercharger
CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Supercharger
CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Supercharger
CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Supercharger

CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Supercharger
CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Applications. Single Pass Design with Inlet and Outlet on the Different Side. Features Two 1.2 Wide Mounting Brackets, For Easy of Installation. Universal Fitment, Compact Size, Excellent for Limited Space Applications. Overall Size: 21x8x2.25 Inch. Core Size: 17×7.5×2 Inch. Inlet and Outlet Size: 3/4 Barbed Tube. This is CXRacing’s Newest Product for The Application Stated. All Products Are Developed from The Ground up in Our R&D Center Based in The USA. Our Parts Are Designed and Built for Improved Performance Gains, with Excellent Fitment and Ease of Installation. This Listing is for the Parts Listed Below, All Other Parts Shown Are NOT INCLUDED. PR, Guam, VI, AK, APO, HI. CXRacing does NOT recommend or support any Road/Street Usage of these products, nor liable for any issues might result from such usage of these products on Road/Street condition Any Modifications to your vehicle Are AT YOUR OWN RISK. CXRacing shall NOT, UNDER ANY CIRCUMSTANCES, be liable upon a claim or action in contract, tort, indemnity or contribution, or other claims relating to the products it sells which exceeds this liability limit. CXRacing shall NOT be liable for third party claims for damages against the customer, or for malfunction, delays, interruption of serv ices, los s of business, loss or damage to exemplary damages, whether or not CXRacing is apprised of the possibility of such claims of damage. The item “CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Supercharger” is in sale since Tuesday, July 30, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “cxracing” and is located in Hacienda Heights, California. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 1020107011991
  • Brand: CXRacing
  • Non-Domestic Product: No

CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Supercharger
18x20-Water-to-Air-Heat-Exchange-1-Copper-Ports-with-EZ-Install-Front-Flange-01-xcj

18×20 Water to Air Heat Exchange 1 Copper Ports with EZ Install Front Flange

18x20 Water to Air Heat Exchange 1 Copper Ports with EZ Install Front Flange
18x20 Water to Air Heat Exchange 1 Copper Ports with EZ Install Front Flange

18x20 Water to Air Heat Exchange 1 Copper Ports with EZ Install Front Flange
18×20 / 144,000 BTUs / 100 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 18″x 21″ plenum or larger. The outlets come out on the 18 side (shown as the vertical side in the picture above). The fin area is 18″x 20″. Outside Dimensions 18(width)x23.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “18×20 Water to Air Heat Exchange 1 Copper Ports with EZ Install Front Flange” is in sale since Tuesday, July 9, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Badger Insulated pipe
  • MPN: Does not apply
  • UPC: 689807252388

18x20 Water to Air Heat Exchange 1 Copper Ports with EZ Install Front Flange
Air-to-Water-Intercooler-Aluminum-Liquid-Heat-Exchanger-01-wpqk

Air to Water Intercooler Aluminum Liquid Heat Exchanger

Air to Water Intercooler Aluminum Liquid Heat Exchanger
Air to Water Intercooler Aluminum Liquid Heat Exchanger
Air to Water Intercooler Aluminum Liquid Heat Exchanger

Air to Water Intercooler Aluminum Liquid Heat Exchanger
CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Applications. Overall Size: 23.5×6.75×2.75 (End-Tank) Inch Core Size: 21x6x2.5 Inch Inlet and Outlet Sizes: 3/4 (0.75) Inch Rows: 2. This is CXRacing’s Newest Product for The Application Stated. All Products Are Developed from The Ground up in Our R&D Center Based in The USA. Our Parts Are Designed and Built for Improved Performance Gains, with Excellent Fitment and Ease of Installation. This Listing is for the Heat Exchanger ONLY, All Other Parts Shown are NOT INCLUDED. PR, Guam, VI, AK, APO, HI. CXRacing does NOT recommend or support any Road/Street Usage of these products, nor liable for any issues might result from such usage of these products on Road/Street condition Any Modifications to your vehicle Are AT YOUR OWN RISK. CXRacing shall NOT, UNDER ANY CIRCUMSTANCES, be liable upon a claim or action in contract, tort, indemnity or contribution, or other claims relating to the products it sells which exceeds this liability limit. CXRacing shall NOT be liable for third party claims for damages against the customer, or for malfunction, delays, interruption of serv ices, los s of business, loss or damage to exemplary damages, whether or not CXRacing is apprised of the possibility of such claims of damage. The item “Air to Water Intercooler Aluminum Liquid Heat Exchanger” is in sale since Tuesday, July 30, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “cxracing” and is located in Hacienda Heights, California. This item can be shipped worldwide.
  • Manufacturer Part Number: 1020107000073
  • Brand: CXRacing

Air to Water Intercooler Aluminum Liquid Heat Exchanger
CXRacing-Heat-Exchanger-For-Air-to-Water-Intercooler-Supercharger-30x7x2-25-Inch-01-buca

CXRacing Heat Exchanger For Air to Water Intercooler Supercharger 30x7x2.25 Inch

CXRacing Heat Exchanger For Air to Water Intercooler Supercharger 30x7x2.25 Inch
CXRacing Heat Exchanger For Air to Water Intercooler Supercharger 30x7x2.25 Inch
CXRacing Heat Exchanger For Air to Water Intercooler Supercharger 30x7x2.25 Inch
CXRacing Heat Exchanger For Air to Water Intercooler Supercharger 30x7x2.25 Inch

CXRacing Heat Exchanger For Air to Water Intercooler Supercharger 30x7x2.25 Inch
CXRacing Aluminum Heat Exchanger For Air to Water Intercooler Applications. Dual Pass Design with Inlet and Outlet on the Same Side. Features with Two 1.2 Wide Mounting Brackets, For Easy of Installation. Universal Fitment, Works For Many Applications. Overall Size: 30x7x2.25 Inch. Core Size: 26×6.5×2 Inch. Inlet and Outlet Size: 3/4 Barbed Tube. This is CXRacing’s Newest Product for The Application Stated. All Products Are Developed from The Ground up in Our R&D Center Based in The USA. Our Parts Are Designed and Built for Improved Performance Gains, with Excellent Fitment and Ease of Installation. This Listing is for the Parts Listed Below, All Other Parts Shown Are NOT INCLUDED. PR, Guam, VI, AK, APO, HI. CXRacing does NOT recommend or support any Road/Street Usage of these products, nor liable for any issues might result from such usage of these products on Road/Street condition Any Modifications to your vehicle Are AT YOUR OWN RISK. CXRacing shall NOT, UNDER ANY CIRCUMSTANCES, be liable upon a claim or action in contract, tort, indemnity or contribution, or other claims relating to the products it sells which exceeds this liability limit. CXRacing shall NOT be liable for third party claims for damages against the customer, or for malfunction, delays, interruption of serv ices, los s of business, loss or damage to exemplary damages, whether or not CXRacing is apprised of the possibility of such claims of damage. The item “CXRacing Heat Exchanger For Air to Water Intercooler Supercharger 30x7x2.25 Inch” is in sale since Tuesday, July 30, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “cxracing” and is located in Hacienda Heights, California. This item can be shipped worldwide.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 1020107011992
  • Brand: CXRacing
  • Non-Domestic Product: No

CXRacing Heat Exchanger For Air to Water Intercooler Supercharger 30x7x2.25 Inch
20x19-Water-to-Air-Heat-Exchanger1-Copper-Ports-with-EZ-Install-Front-Flange-01-miju

20×19 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

20x19 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
20x19 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

20x19 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
20×19/152,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 20″x 20″ plenum or larger. The outlets come out on the 20 side (shown as the vertical side in the picture above). The fin area is 20″x 19″. Outside Dimensions 20(width)x22.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “20×19 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Monday, June 24, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252487

20x19 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
20x22-Water-to-Air-Heat-Exchanger1-Copper-Ports-with-EZ-Install-Front-Flange-01-ttb

20×22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

20x22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
20x22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

20x22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
20×22 / 176,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 20″x 23″ plenum or larger. The outlets come out on the 20 side (shown as the vertical side in the picture above). The fin area is 20″x 22″. Outside Dimensions 20(width)x25.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “20×22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Kitchen Tools & Gadgets\Cooking Utensils”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252517
  • Material: Copper
  • Custom Bundle: No

20x22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
Liquid-Heat-Exchanger-Water-to-Air-Intercooler-pump-01-vfd

Liquid Heat Exchanger Water to Air Intercooler + pump

Liquid Heat Exchanger Water to Air Intercooler + pump
Liquid Heat Exchanger Water to Air Intercooler + pump
Liquid Heat Exchanger Water to Air Intercooler + pump
Liquid Heat Exchanger Water to Air Intercooler + pump
Liquid Heat Exchanger Water to Air Intercooler + pump

Liquid Heat Exchanger Water to Air Intercooler + pump
CXRacing Aluminum Heat Exchanger + Water – Air Intercooler + Water Pump. This is a Huge Liquid to Air Intercooler and Heat Exchanger, Perfect for High Power Applications, Supports 1000+ HP. Heat Exchanger: Overall Size:23.5×6.75×2.75(End-Tank) Inch Core Size:21x6x2.5 Inch Inlet and Outlet Sizes:3/4 (0.75) Inch Rows:2 Pressure Released Cap:1.1 Bar(16Lbs) Water to Air Intercooler: Overall Size:18″x13″x4.5″ Core Size:10″x9″x4.5″ Two Air Inlet Outlet:3″ Two Water Inlet Outlet:3/4″ Core:4.5″ Water Pump: 12VDC 3/4″ Water Inlet Outlet. This is CXRacing’s Newest Product for The Application Stated. All Products Are Developed from The Ground up in Our R&D Center Based in The USA. Our Parts Are Designed and Built for Improved Performance Gains, with Excellent Fitment and Ease of Installation. This Listing is for the Heat Exchanger, Water to Air Intercooler & Water Pump ONLY, All Other Parts Shown are NOT INCLUDED. Water to Air Intercooler. PR, Guam, VI, AK, APO, HI. CXRacing does NOT recommend or support any Road/Street Usage of these products, nor liable for any issues might result from such usage of these products on Road/Street condition Any Modifications to your vehicle Are AT YOUR OWN RISK. CXRacing shall NOT, UNDER ANY CIRCUMSTANCES, be liable upon a claim or action in contract, tort, indemnity or contribution, or other claims relating to the products it sells which exceeds this liability limit. CXRacing shall NOT be liable for third party claims for damages against the customer, or for malfunction, delays, interruption of serv ices, los s of business, loss or damage to exemplary damages, whether or not CXRacing is apprised of the possibility of such claims of damage. The item “Liquid Heat Exchanger Water to Air Intercooler + pump” is in sale since Tuesday, July 30, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “cxracing” and is located in Hacienda Heights, California. This item can be shipped worldwide.
  • Manufacturer Part Number: 1024207001113
  • Brand: CXRacing

Liquid Heat Exchanger Water to Air Intercooler + pump
22x30-Water-to-Air-Heat-Exchanger1-Copper-Ports-with-EZ-Install-Front-Flange-01-lpi

22×30 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

22x30 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
22x30 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

22x30 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
22×30 /230,000 BTUs / 100 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 22″x 31″ plenum or larger. The outlets come out on the 22 side (shown as the vertical side in the picture above). The fin area is 22″x 30″. Outside Dimensions 22(width)x33.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Check our other listings for an installation kit that makes it super easy to do the entire installation. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “22×30 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, June 20, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252616

22x30 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
16x18-Water-to-Air-Heat-Exchanger1-Copper-Ports-with-EZ-Install-Front-Flange-01-ou

16×18 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

16x18 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
16x18 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

16x18 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
16×18 / 115,200 BTUs / 100 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 16″x 19″ plenum or larger. The outlets come out on the 16 side (shown as the vertical side in the picture above). The fin area is 16″x 18″. Outside Dimensions 16(width)x21.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market. Because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “16×18 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, June 20, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252319

16x18 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
20x20-Water-to-Air-Heat-Exchanger1-Copper-Ports-with-EZ-Install-Front-Flange-01-hp

20×20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
20×20 / 160,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 20″x 21″ plenum or larger. The outlets come out on the 20 side (shown as the vertical side in the picture above). The fin area is 20″x 20″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Outside Dimensions 20(width)x23.5(Length from Manifold to Base)x3.5(Thickness). Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “20×20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, June 20, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • UPC: 689807252500
  • MPN: 20X20

20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange