Results for tag "ports"

53 Articles
15x21-Water-to-Air-Heat-Exchanger1-Copper-Ports-with-EZ-Install-Front-Flange-01-lyi

15×21 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

15x21 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
15x21 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

15x21 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
15×21 /126,000 BTUs / 100 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 15″x 22″ plenum or larger. The outlets come out on the 15 side (shown as the vertical side in the picture above). Outside Dimensions 15(width)x24.5(Length from Manifold to Base)x3.5(Thickness). The fin area is 15″x 21″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “15×21 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Monday, June 24, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252258

15x21 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
18x24-Water-to-Air-Heat-Exchanger-1Copper-Ports-With-Install-Kit-01-eyfx

18×24 Water to Air Heat Exchanger 1Copper Ports With Install Kit

18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit

18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
18X24 / 172,800 BTUs / 100 PSI For use in your hot air furnace plenum. Please see charts in pics above. Not recommended for air compressors. This listing includes the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 18″x25″ plenum or larger. The outlets come out on the 18 side (shown as the vertical side in the picture above). The fin area is 18″x24″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This also includes the installation kit shown in the pictures above. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furance if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “18×24 Water to Air Heat Exchanger 1Copper Ports With Install Kit” is in sale since Thursday, December 26, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply

18x24 Water to Air Heat Exchanger 1Copper Ports With Install Kit
22X25-Water-to-Air-Heat-Exchanger-1-Copper-Ports-With-Install-Kit-01-lsu

22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
22X25 / 220,000 BTUs / 100 PSI For use in your hot air furnace plenum. Not recommended for air compressors. This listing includes the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 22″x26″ plenum or larger. The outlets come out on the 22 side (shown as the vertical side in the picture above). The fin area is 22″x25″. Outside Dimensions 22(width)x28.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This also includes the installation kit shown in the pictures above. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furance if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit” is in sale since Thursday, December 26, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply

22X25 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
30x30-Water-to-Air-Heat-Exchanger1-1-4-Copper-Ports-With-Install-Kit-01-uar

30×30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit

30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit

30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
30×30/360,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 30″x 31″ plenum or larger. The outlets come out on the 30 side (shown as the vertical side in the picture above). The fin area is 30″x 30″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. This exchanger has 1 1/4 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Outside Dimensions 30(width)x33.5(Length from Manifold to Base)x3.5(Thickness). This also includes the installation kit shown in the pictures above. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furance if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “30×30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit” is in sale since Thursday, December 26, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply

30x30 Water to Air Heat Exchanger1 1/4 Copper Ports With Install Kit
22X25-Water-to-Air-Heat-Exchanger1-Copper-Ports-with-EZ-Install-Front-Flange-01-rpqq

22X25 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

22X25 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
22X25 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

22X25 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
22×25 /220,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 22″x 26″ plenum or larger. The outlets come out on the 22 side (shown as the vertical side in the picture above). The fin area is 22″x 25″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Outside Dimensions 22(width)x28.5(Length from Manifold to Base)x3.5(Thickness). This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “22X25 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, June 20, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252593

22X25 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
12x15-Water-to-Air-Heat-Exchanger-1-Copper-Ports-With-Install-Kit-01-xqfl

12×15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12×15 72,000 BTUs / 100 PSI. For use in your hot air furnace plenum. Please see charts in pics above. Not recommended for air compressors. This listing includes the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 12″x16″ plenum or larger. The outlets come out on the 12 side (shown as the vertical side in the picture above). The fin area is 12″x15″. Outside Dimensions 12(width)x18.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This also includes the installation kit shown in the pictures above. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furance if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “12×15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit” is in sale since Thursday, December 26, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply

12x15 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12-Water-to-Air-Heat-Exchanger-1-Copper-Ports-With-Install-Kit-01-tbix

12×12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
12×12 57,600 BTUs / 100 PSI. For use in your hot air furnace plenum. Please see charts in pics above. Not recommended for air compressors. This listing includes the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 12″x13″ plenum or larger. The outlets come out on the 12 side (shown as the vertical side in the picture above). The fin area is 12″x12″. Outside Dimensions 12(width)x15.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This also includes the installation kit shown in the pictures above. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furance if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “12×12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit” is in sale since Friday, December 27, 2019. This item is in the category “Everything Else\Every Other Thing”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped to United States, Canada.
  • UPC: 689807259370

12x12 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x22-Water-to-Air-Heat-Exchanger1-Copper-Ports-with-EZ-Install-Front-Flange-01-vv

16×22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

16x22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
16x22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange

16x22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
16×22 / 140,800 BTUs / 100 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 16″x 23″ plenum or larger. The outlets come out on the 16 side (shown as the vertical side in the picture above). The fin area is 16″x 22″. Outside Dimensions 16(width)x25.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “16×22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, June 20, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252357

16x22 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange
16x18-Water-to-Air-Heat-Exchanger-1-Copper-Ports-With-Install-Kit-01-pun

16×18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
16×18 /115,200 BTUs / 100 PSI For use in your hot air furnace plenum. See charts in pics above. Not recommended for air compressors. This listing includes the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 16″x 19″ plenum or larger. The outlets come out on the 16 side (shown as the vertical side in the picture above). The fin area is 16″x 18″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This also includes the installation kit shown in the pictures above. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Check our other listings for an installation kit that makes it super easy to do the entire installation. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They can be installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “16×18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit” is in sale since Thursday, December 26, 2019. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Components\Heat Exchangers”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • Brand: Undisclosed
  • MPN: Does not apply

16x18 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24-Water-to-Air-Heat-Exchanger-1-Copper-Ports-With-Install-Kit-01-ckkf

24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit

24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit
24X24 / 230,400 BTUs / 100 PSI For use in your hot air furnace plenum. Please see charts in pics above. Not recommended for air compressors. This listing includes the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 24″x25″ plenum or larger. The outlets come out on the 24side (shown as the vertical side in the picture above). The fin area is 24″x24″. Outside Dimensions 24(width)x27.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. This also includes the installation kit shown in the pictures above. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furance if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit” is in sale since Thursday, June 20, 2019. This item is in the category “Everything Else\Every Other Thing”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
  • UPC: 689807259677

24X24 Water to Air Heat Exchanger 1 Copper Ports With Install Kit